Our basic android software can be programmed
to send you Emails / Photos automatically
at regular time intervals as deired by you.
In addition, it can also send you SMS , calls
and Image of the intruders through Email
if our Hardware unit is installed.
The Hardware unit detects intrusion
1. Using a PIR motion detector
And optionally
2. Using a door magnetic switch
PIR stands for Passive Infra Red.
They sense heat from objects
They form a part of our control unit
Thre is no wiring to be done by you
Keep the unit in the place monitored
Ensure that battery is charged
Ensure that unit is switched ON
For additional protection you can
add a door sensor so that the ALARM
is activated whenevr the door is Opened.
However, with this option you have to
Fix the magnetic swiches in door
And Wire it to the control unit
Wiring is a simple two wire connection
There will be two pieces of sensors
given free along with the unit. FIX
The piece with wire in Frame
The other one in moving door
With GAP between them less than 3 mm
We will be providing only one set.
Additional switches can be procured
and connected in series if you want to
monitor more than one entry point.
If the Hardware Unit is used, then
it has to be paired with the Mobile
as the communication is through a
Blue Tooth Link. Click link below
for Details and Procedure of Blue Tooth pairing
